A COTS (Commercial Off The Shelf) module is as described, a pre build designed module that you can plug into a system to extend its functionality.
We currently offer two types of COTS modules, the SoM (System on Module) FPGA modules and the FMC (FPGA Mezzanine Card) modules.
SoM Modules:
SoM3-MPF300T
System on Module (SoM), using Microsemi PolarFire MPF300T-1FCVG484 FPGA The SoM3-MPF300T is a small footprint System On Module (SoM) with 40x50mm dimensions. It has a low power, highly secure FPGA from the PolarFire family from Microsemi. It comes with 4GB of DDR4 memory, Ethernet PHY, and FLASH. This SoM is ideal for being used in...
TE0710
- Industrial-grade Xilinx Artix-7 FPGA module (100T*)
- 256 Mbit (32 Mbyte) Quad-SPI Flash memory (for configuration and operation) accessible through:
- FPGA
- JTAG port (SPI indirect)
- Gigabit Ethernet
TE0711
- Industrial-grade Xilinx Artix-7 FPGA module (100T*)
- 256 Mbit (32 Mbyte) Quad-SPI Flash memory (for configuration and operation) accessible through:
- FPGA
- JTAG port (SPI indirect)
TE0712
- Xilinx Artix-7 FPGA module (100T, 200T), supported by the free Xilinx Vivado WebPACK tool.
- 256 Mbit (32 Mbyte) Quad-SPI Flash memory (for configuration and operation)
- 4 MGTs (multi gigabit transceivers)
TE0715-7015
- Xilinx Zynq 7015 XC7Z015-1CLG485C
- Rugged for shock and high vibration
- ARM dual-core Cortex-A9 MPCore
TE0715-7030
- Xilinx Zynq 7030 XC7Z030-1SBG485C
- Rugged for shock and high vibration
- ARM dual-core Cortex-A9 MPCore
TE0720
- Industrial-grade Xilinx Zynq SoC micromodule
- Rugged for high shock and vibration
- ARM dual-core Cortex-A9 MPCore @ up to 866 MHz
TE0741
- Industrial-grade Xilinx Kintex-7 T FPGA module (70T*, 160T*, 325T, 410T) * Device supported by the free Xilinx ISE WebPACK tool.
- 256 Mbit (32 Mbyte) Quad-SPI Flash memory (for configuration and operation) accessible through:
- FPGA
- JTAG port (SPI indirect)
TE0841
- Kintex UltraScale KU35 or KU40 in A784 Package
- Memory - 2 x 16-Bit DDR4 - SPI Boot Flash - 256 MByte max.
TEO820-ZU2CG
- Xilinx Zynq UltraScale+ XCZU2CG-1SFVC784E
- 4 x 5 cm form factor
- 2 x 512 MByte 32-Bit width DDR4 SDRAM
- 2 x 32 MByte (2 x 256 MBit) SPI Boot Flash dual parallel
- 4 GByte eMMC Memory (up to 64 GByte)
TEO820-ZU3EG
- Xilinx Zynq UltraScale+ XCZU3EG-1SFVC784E
- 4 x 5 cm form factor
- 2 x 512 MByte 32-Bit width DDR4 SDRAM
- 2 x 32 MByte (2 x 256 MBit) SPI Boot Flash dual parallel
- 4 GByte eMMC Memory (up to 64 GByte)
TEO820-ZU4EV
- Xilinx Zynq UltraScale+ XCZU4EV-1SFVC784E
- 4 x 5 cm form factor
- 2 x 512 MByte 32-Bit width DDR4 SDRAM
- 2 x 32 MByte (2 x 256 MBit) SPI Boot Flash dual parallel
- 4 GByte eMMC Memory (up to 64 GByte)
FMC Modules:
RF Modules:
FMC L-Band RF Receiver
-
LPC FMC connector, compliant with VITA 57.1 FMC standard
-
MAX2121B RF Tuner (925 – 2,250 MHz) to ZF
-
Programmable baseband bandwidth from 40 MHz to 100 MHz
-
Dual-channel 12-bit ADC, 250 Msps
FMC-ZU1RF-A
- VITA 57.1 Specifications compliant
- Single Module Width 69mm, Depth 76.5mm
- Fully Hardware compatible with ADRV9371 Evaluation Board from ADI
- 4x MGT DP[3:0]_M2C, 4x MGT DP[3:0]_C2M for JESD204B interfaces up to 6Gbps
- 2x MGTCLK[1:0]_M2C
- LA Bus for LVDS and Single-Ended signals
- VADJ = 2.5V to 1.5V
FMC1831
The FMC1831 is an FMC module designed to be compatible with AMC, VPX, PCI, PCIe, CompactPCI and PC/104 carriers. The module has two dual channel AD9361 transceivers with a maximum sampling frequency of 122.8 MHz over a bandwidth of 200 KHz to 56 MHz. A reference clock can be either externally supplied or be generated...
FMC30RF
- Conduction cooled compatible
- ANSI/VITA 57.1-2010 compliant
- RF coverage from 400Mhz to 3.0GHz*
- Time Domain Duplex (TDD) and Frequency Domain Duplex (FDD) compatible
SDR400
- 2 RF Channels, DC to 6 GHz acquisition
- Software tunable Channel Bandwidth 200 kHz-56 MHz
- 2 x Multiple Synchronized Input and output
- AD9361 Dual 12 bits transceivers
- Tunable RF Bandpass Filters
- AD9656 Dual 16 bits AD converter (for baseband RF)
ADC Modules:
ADC500-5
- 5 x ADC 16 bit @ 500MS/s
- High Pin Count ( HPC ) FMC module
- Trigger Input
- External Clock up to 4 GHz
- 100 MHz onboard VCXO and 10MHz TCXO for reference clock
ADCFN02 – HPC
- Two channels of 16-bit ADC @ 105MHz
- Impedance 50-ohm single-ended
- Cross Talk 100dB@10MHz, 80dB@30MHz
- S/N 82dB or over
- LPF 400KHz-30MHz@-3dB
ADCFN04 – HPC
- 4-channels of 16-bit ADC to 250KHz
- impedance 50-ohm single-ended
- S/N 97dB or over
- DC coupling 10Vpp(+/-5V)
- External trigger: impedance 50-ohm
ADCFN10-AC – HPC
- 10-channels of 16-bit ADC @ 105MHz
- Impedance 50-ohm single-ended
- Cross Talk 100dB@10MHz, 80dB@30MHz
- S/N 82dB or over
- LPF 400KHz-30MHz@-3dB
ADCFN10-DC – HPC
- 10-channels of 16-bit ADC @ 150MHz
- Impedance 50-ohm single-ended
- Cross Talk 100dB@10MHz, 80dB@30MHz
- S/N 82dB or over
- LPF 400KHz-30MHz@-3dB
FM582
2 channel 1GSPS 8 bit ADC card in FMC format using a Low Pin-Count connector The following features are controllable by software: Input signal range, coupling, termination and offset adjustment Self-calibration Sampling clock selection Direction of external trigger in/out ADC configuration and status The offset adjustment does not clip the signal at the highest range...
FMC103 – LPC
- Four Channel 12-bit 210 MSPS A/D conversion
- Available as air cooled and conduction cooled
- VITA 57.1-2010 compliant
- Based on TI ADS62P28
FMC104
- Four Channel 14-bit 250 MSPS A/D conversion
- Available as air cooled and conduction cooled
- VITA 57.1-2010 compliant
- Based on TI ADS62P49
FMC107
- Eight channel 12-bit 65 MSPS A/D conversion
- Available as air cooled and conduction cooled
- VITA 57.1-2010 compliant
- Based on TI ADS62P28
FMC108
- Eight channel 14-bit 250MSPS A/D conversion
- Available as air cooled and conduction cooled
- VITA 57.1-2010 compliant
- Based on TI ADS62P49
FMC112
- 12 channel 14-bit 125 Msps A/D conversion
- Conduction cooled compatible
- ANSI/VITA 57.1-2010 compliant
- Based on LTC2175-14
FMC116
- 16 channel 14-bit 125 Msps A/D conversion
- Conduction cooled compatible
- ANSI/VITA 57.1-2010 compliant
- Based on LTC2175-14
FMC122
- Dual – Single 8-Bit Channel Operation
- 2-Channel 1.25 Gsps A/D conversion Mode
- 1-channel 2.50 Gsps A/D conversion Mode (calibration package required, option –C48 to be added to P/N)
- VITA 57.1-2010 compliant.
- Conduction Cooled
FMC123
- 2-Channels 16-bit 1.00 Gsps A/D
- 1.5Ghz Analog Bandwidth
- Usable in the 3rd Nyquist Zone
- VITA 57.1 HPC compliant
- Mil-I-46058c Conformal Coating Complaint (optional)
FMC125
- Quad – Dual – Single 8-Bit Channel Operation
- VITA 57.1-2010 compliant.
- Conduction Cooled
- 1.25Gsps or 625Msps DDR LVDS outputs
FMC126
- Quad – Dual – Single 10-Bit Channel Operation
- VITA 57.1-2010 compliant.
- Conduction Cooled
- 1.25Gsps DDR LVDS outputs
FMC140
- Four-channel, 16-bit A/D up to 370 MSPS
- VITA 57.1-2010 compliant
- JESD204B serial interface
- Conduction-cooled - Standard Option
FMC161
- One ADC12D1800: Single channel 12-bit 3.6Gsps or dual channel at 1.8Gsps
- VITA 57.1-2010 compliant
- Conduction Cooled
- Single ended AC-coupled analog signals
FMC164
- Four-channel 16-bit 250MSPS A/D conversion
- Available as air cooled and conduction cooled
- VITA 57.1-2010 compliant
- Based on TI ADS42LB69
FMC168 – LPC
- Eight-channel 16-bit 250MSPS A/D conversion
- Available as air cooled and conduction cooled
- VITA 57.1-2010 compliant
- Based on TI ADS42LB69
DAC Modules:
DACNF01- HPC
- Single channel of 16-bit DAC @ 500MHz
- Impedance 50-ohm differential
- DC coupling
- Output level 1Vpp (0V to 1V)
DACNF04 – HPC
- 4-ch of 16-bit DAC
- Impedance 50-ohm single-end
- DC coupling
- Output level 0 to +5V, +/-5V, 0 to +10V or +/-10V
DACNF05 – HPC
- 5-channels of 16-bit DAC @ 500MHz
- impedance 50-ohm differential
- DC coupling
- output level 1Vpp (0V to 1V)
DACNF08 – HPC
The RFM-DACNF08 is a eight channel Digital to Analog converter FMC which complies with VITA 57.1-2010.
It uses 4x AD9122 DAC chips, with a sampling speed of up to 1.2GHz
FMC204 – HPC
- 4-Channels 16-bit 1 Gsps D/A conversion Mode
- VITA 57.1-2010 compliant
- Conduction Cooled – Standard Option
- LVDS data format
FMC216 – HPC
- 16 channel 16-bit 312.5 Msps D/A conversion
- Conduction cooled compatible
- ANSI/VITA 57.1-2010 compliant
- Based on DAC39J84
FMC230 – HPC
- Two AD9129: 2-channel 14-bit D/A up to 5.7 Gsps (2.85Gsps without 1:2 interpolation) – LVDS
- VITA 57.1-2010 compliant
- Conduction Cooled – Standard Option
- Single ended AC-coupled analog signals
SMT-FMC211 – LPC
The main component of the SMT-FMC211 is the Texas Instruments 4 channel DAC – TI's Quad 1.25GHz DAC3484. This device offers excellent SFDR performance better than 70dBc, with an output sample rate of over 312MSPS.
ADC / DAC Modules:
FM191
FMC-LPC I/O Module with ADCs, DACs, quad USB 3.0 type C ports and a 40-pin GPIO header. The FM191-RUA1 has a VITA57.1 FMC-LPC connector and follows the electronics specification and recommendations of the standard but is NOT form-factor compatible and will NOT fit all FMC carriers. Two versions are available. The FM191-R main features are...
FM192
FMC I/O Module with:
- ADCS/DAC/CANS I/Os
- WiFi/BLE/GPS/GNSS/4G/AUDIO MODULES
- IMU/TEMPERATURE & HUMIDITY SENSOR
- AUDIO SENSORS
- USB3.0
- GPIO
FMC-DAQ2P5
- ADC12J2700 – 12bit 2.7GSPS JESD204B.
- LM95233 for ADC temperature monitoring.
- JESD204B via HPC connector, 8 lanes 5.4Gbps per lane.
- AD9136 – 16-bit dual channel 2.8GSPS JESD204B DAC.
- HMC7044 – High performance 3.2GHz JESD204B jitter attenuator.
FMC-FADB
- FMC HPC Connector (high-pin count with 400 pin high-speed array connector)
- QSE Connector Compatible with Samtec EQRF
- 3x ADC Chips from Linear Technology: LTC2175-14
FMC110
- Dual – A/D – D/A Channel Operation
- 2-Channels 12-bit 1.0 Gsps A/D
- 2-Channels 16-bit 1.0 Gsps D/A
- VITA 57.1-2010 compliant
- Conduction Cooled – Standard Option
FMC121
- 2-Channels 16-bit 1.0 Gsps A/D
- 1.5Ghz Analog Bandwidth
- Usable in the 3rd Nyquist Zone
- 2-Channels 16-bit 1.4 Gsps D/A
- 2.8 GSPS Update Rate
- Onboard 48-bit NCO for flexible Signal Placement
- Mil-I-46058c Conformal Coating Complaint (optional)
FMC142
- Two-channel, 16-bit A/D up to 370 MSPS
- Two-channel, 16-bit D/A up to 2.5 GSPS
- VITA 57.1-2010 compliant
- JESD204B serial interface
FMC144
- Four-channel, 16-bit A/D up to 370 MSPS
- Four-channel, 16-bit D/A up to 2.5 GSPS
- VITA 57.1-2010 compliant
- JESD204B serial interface
- Conduction-cooled – Standard Option
FMC150
- VITA 57.1-2010 compliant
- Conduction Cooled – Standard Option
- Single ended AC-coupled analog signals.
- 6 MMCX/SSMC connectors available from the front panel
FMC151
- VITA 57.1-2010 compliant
- Conduction Cooled – Standard Option
- Single ended DC-coupled analog signals.
- Digitally controlled offset correction
FMC160
- One ADC12D1800: Single channel 12-bit 3.6Gsps
- One AD9129: Single channel 14-bit D/A up to 5.6 Gsps (2.8Gsps without 1:2 interpolation) - LVDS
- VITA 57.1-2010 compliant
- Conduction Cooled – Standard Option
FMC170
- Single-channel, 10-bit A/D up to 5Gsps
- Single-channel, 10-bit D/A up to 5Gsps
- VITA 57.1-2010 compliant
- Conduction-cooled - Standard Option
- AC-coupled analog signals
FMC176
- VITA 57.1-2010 compliant
- Conduction Cooled – Standard Option
- Single ended AC-coupled analog signals.
- 10 MMCX/SSMC connectors available from the front panel
RFM-ADAFF22
- 2-ch
- impedance 50-ohm single-ended
- Cross Talk 100dB@10MHz, 80dB@30MHz
- S/N 82dB or over
- LPF 400KHz-30MHz@-3dB
RFM-ADAFF62
- 6-ch
- impedance 50-ohm single-ended
- Cross Talk 100dB@10MHz, 80dB@30MHz
- S/N 82dB or over
- LPF 400KHz-30MHz@-3dB
SMT-FMC311
- VITA57.1 FMC-LPCTM (subset, no MGT) mezzanine.
- One dual channel ADC.
- One dual channel DAC.
- PLL clock synthesizer.
- External clock and trigger inputs.
DSP Modules:
FMC645
- 1.2GHz TMS320C6455 DSP
- Fully conduction cooled compliant
- VITA 57.1-2010 compliant
- 1.5V to 3.3V VADJ operation
FMC667
- 1.25GHz, 8-core, TMS320C6678 DSP
- Fully conduction cooled compliant
- VITA 57.1-2010 compliant
- 1.8V VADJ operation only
Clock Distribution modules:
FMC406
- External clock input and onboard VCO
- External reference input and on board reference (30.72MHz)
- External 1PPS, Sync and Trigger inputs
- Eight synchronized clock outputs (34.375MHz-250MHz)
FMC407
- External clock input and onboard VCO
- External reference input and onboard reference (30.72MHz)
- External 1PPS, Sync, and Trigger inputs
- Eight synchronized clock outputs (34.375MHz-4.4GHz)
Optical Transceivers:
FMC410
- Ten independent transmit channels
- Ten independent receive channels
- High channel capacity: 6.25Gbps or 10Gbps per direction (TX/RX)
- High port density
I/O Modules:
AES-FMC-IMAGEON-G
- HDMI Input/Output FMC module (FMC-IMAGEON)
- HDMI input
- HDMI output
- Interface for ON Semiconductor VITA image sensor modules
- Video clock synthesizer
FM510
- SDI Video input & output (75 Ω)
- Composite (CVBS) Video input & output (75 Ω)
- Supported formats
- PAL B/D/G/H/I/M/N
- NTSC M
FM550 –
- 2x SFF-8088 interfaces
- 4x lanes per interface
- Compliant with mini-SAS pin-out
- Designed for up to 10Gbps operatio
FMC DEL
- LEMO 00 connectors for all input/outputs.
- FMC mezzanine using a Low Pin Count (LPC) connector.
- TTL, outputs capable of driving a 50 Ohm load, > 2 V/ns slew rate
FMC DIO
- 5 input/output ports (Lemo 00 connectors)
- Output levels: LVTTL (+3.3 V over a 50-Ohm load).
- Input levels: Logic standard (Vih = [1-5]V)
- Output Rise/fall times: max. 2 ns
FMC TDC
- Time to Digital Converter - 1ns 5ch - Low-Pin-Count
- 5 inputs, TTL with software selectable 50 Ohm termination.
- LEMO 00 connectors for all inputs.
- External inputs need to be protected against +15V pulses with a pulse width of at least 10us@50Hz.
- Time tags apply to rising edges of inputs.
FMC-CL
- Dual CameraLink Ports
- Single SATA-3 Port
- Low-pin-count VITA57.1 FMC compatible
- PoCL (Power over Camera Link) support
- Up to 85 MHz data rate
FMC-HDMI: Dual HDMI Input Expansion Card
FMC_HDMI_bottomFMC_HDMI_topFMC_HDMIFMC_HDMI_use Product Description The FMC-HDMI extends FMC-compatible FPGA systems with two HDMI Type A input ports. It’s extremely useful for image or video processing applications. One of the ports features a fully-fledged HDMI 1.4 receiver with CEC, HDCP, audio, and 3D TV support. The other port provides cable equalization and buffering for HDMI signals, leaving...
FMC424
- Dual QSFP+
- Conduction cooled compatible
- ANSI/VITA 57.1-2010 electrically compliant
- 1.65V to 3.3V VADJ operation
FMC431
- Dual 1 GbE (1000BASE-T) over RJ45
- Conduction cooled compatible
- ANSI/VITA 57.1-2010 compliant
- 1.8V to 3.3V VADJ operation
FMC432
- Dual 10 GbE (10GBASE-T) over RJ45
- Conduction cooled compatible
- ANSI/VITA 57.1-2010 compliant
- 1.8V to 3.3V VADJ operation
NES-FMC-CAN
FMC Mezzanine dual or quad Canbus This is a Dual or Quad CANbus with autotest capabilities that can be used on a wide range of carriers, Standalone, PCIExpress, CompactPCI, VPX, CompactPCI Express, AdvanceTCA and AMC. Features FMC LPC Connector Type (HPC can also be mounted) Dual or Quad channel can bus channels SN65HVD233 with autotest...
NES-FMC1553-4
- 2 or 4 channel BC/RT/MT MIL-STD1553
- FMC LPC connector (Type HPC can also be mounted )
- Transceivers HI-1579PCI
- Transformers DB2725EX
- Front panel connector SCSI 50 pin
- IPMI Memory type EEPROM
- 24CO4 MIL-STD1553 Compliant BCJRT/MT
NES-FMC4ADC
FMC Mezzanine module with 4 channel 100MSPS ADC By default this card only uses signals from the LPC rows of the HPC connector that is mounted. The gain can be set by software in three steps: +/-50mV, +/-0.5mV, and +/-5V. AN advanced offset circuit is used in the front-end design of the ADC board, and...
NES-FMCA429-CAN
- FMC LPC connector type
- ARINC-429 2 Receive and 2 Transmit channels with autotest capabilities
- DEI1072 Arinc 429 line drivers and DEI1041 line receivers
- 2 can bus channels SN65HVD233 with autotest capabilities
- Front panel connector SCSI 50 pin
- IPMI Memory type EEPROM 24C04
NES-FMCSER
- FMC LPC connector (Type HPC can also be mounted)
- 4 or 8 configurable channels RS232/422/485
- Front panel connector SCSI 50 pin
- Baud Rate 10Mbps in RS485/422 mode, 1Mbps in RS232 mode
Robust Ethernet FMC
- 4 x 10/100/1000Mbps Ethernet Ports
- LPC FMC: Pin compatible with FMC carriers
- 125MHz Oscillator for the MAC
- Weight 450 grams
SMT-FMC510L
FMC510LFMC510L bottomSMT-FMC501L smallSMT-FMC510L Bottom small The SMT-FMC510L is an FMC module with a low pin count connector (LPC). It is primarily designed to attach to the EMC2-DP FMC PCIe104 carrier board and provide analogue video and serial interfaces. Connectivity is via BNC connectors on the main FMC PCB, BNC connectors on an adaptor PCB, and...
TEF0007-02A
The Trenz Electronic TEF0007 is a DisplayPort 1.2 compatible FMC card with data rates up to 5.4 Gbps and sink and source DP connector. SN65DP159 is used as DP Retimer and SN75DP130 as DP Redriver to connect sink and source to on board Kintex-7 FPGA. Image stream over FMC can be realized over 4 MGTs...
TEF0008-02
The Trenz Electronic TEF0008 is a FPGA to Mezzanine Card (FMC) based on VITA 57.1 FMC HPC Standard, with four SFP+ 10 GBit ports for fiber optical SFP modules. It is inteded for use on a FMC HPC carrier and can not be used stand-alone.
