FMC I/O Modules
AES-FMC-IMAGEON-G
- HDMI Input/Output FMC module (FMC-IMAGEON)
- HDMI input
- HDMI output
- Interface for ON Semiconductor VITA image sensor modules
- Video clock synthesizer
FM510
- SDI Video input & output (75 Ω)
- Composite (CVBS) Video input & output (75 Ω)
- Supported formats
- PAL B/D/G/H/I/M/N
- NTSC M
FM550 –
- 2x SFF-8088 interfaces
- 4x lanes per interface
- Compliant with mini-SAS pin-out
- Designed for up to 10Gbps operatio
FMC DEL
- LEMO 00 connectors for all input/outputs.
- FMC mezzanine using a Low Pin Count (LPC) connector.
- TTL, outputs capable of driving a 50 Ohm load, > 2 V/ns slew rate
FMC DIO
- 5 input/output ports (Lemo 00 connectors)
- Output levels: LVTTL (+3.3 V over a 50-Ohm load).
- Input levels: Logic standard (Vih = [1-5]V)
- Output Rise/fall times: max. 2 ns
FMC TDC
- Time to Digital Converter - 1ns 5ch - Low-Pin-Count
- 5 inputs, TTL with software selectable 50 Ohm termination.
- LEMO 00 connectors for all inputs.
- External inputs need to be protected against +15V pulses with a pulse width of at least 10us@50Hz.
- Time tags apply to rising edges of inputs.
FMC-CL
- Dual CameraLink Ports
- Single SATA-3 Port
- Low-pin-count VITA57.1 FMC compatible
- PoCL (Power over Camera Link) support
- Up to 85 MHz data rate
FMC-HDMI: Dual HDMI Input Expansion Card
FMC_HDMI_bottomFMC_HDMI_topFMC_HDMIFMC_HDMI_use Product Description The FMC-HDMI extends FMC-compatible FPGA systems with two HDMI Type A input ports. It’s extremely useful for image or video processing applications. One of the ports features a fully-fledged HDMI 1.4 receiver with CEC, HDCP, audio, and 3D TV support. The other port provides cable equalization and buffering for HDMI signals, leaving...
FMC424
- Dual QSFP+
- Conduction cooled compatible
- ANSI/VITA 57.1-2010 electrically compliant
- 1.65V to 3.3V VADJ operation
FMC431
- Dual 1 GbE (1000BASE-T) over RJ45
- Conduction cooled compatible
- ANSI/VITA 57.1-2010 compliant
- 1.8V to 3.3V VADJ operation
FMC432
- Dual 10 GbE (10GBASE-T) over RJ45
- Conduction cooled compatible
- ANSI/VITA 57.1-2010 compliant
- 1.8V to 3.3V VADJ operation
NES-FMC-CAN
FMC Mezzanine dual or quad Canbus This is a Dual or Quad CANbus with autotest capabilities that can be used on a wide range of carriers, Standalone, PCIExpress, CompactPCI, VPX, CompactPCI Express, AdvanceTCA and AMC. Features FMC LPC Connector Type (HPC can also be mounted) Dual or Quad channel can bus channels SN65HVD233 with autotest...
NES-FMC1553-4
- 2 or 4 channel BC/RT/MT MIL-STD1553
- FMC LPC connector (Type HPC can also be mounted )
- Transceivers HI-1579PCI
- Transformers DB2725EX
- Front panel connector SCSI 50 pin
- IPMI Memory type EEPROM
- 24CO4 MIL-STD1553 Compliant BCJRT/MT
NES-FMC4ADC
FMC Mezzanine module with 4 channel 100MSPS ADC By default this card only uses signals from the LPC rows of the HPC connector that is mounted. The gain can be set by software in three steps: +/-50mV, +/-0.5mV, and +/-5V. AN advanced offset circuit is used in the front-end design of the ADC board, and...
NES-FMCA429-CAN
- FMC LPC connector type
- ARINC-429 2 Receive and 2 Transmit channels with autotest capabilities
- DEI1072 Arinc 429 line drivers and DEI1041 line receivers
- 2 can bus channels SN65HVD233 with autotest capabilities
- Front panel connector SCSI 50 pin
- IPMI Memory type EEPROM 24C04
NES-FMCSER
- FMC LPC connector (Type HPC can also be mounted)
- 4 or 8 configurable channels RS232/422/485
- Front panel connector SCSI 50 pin
- Baud Rate 10Mbps in RS485/422 mode, 1Mbps in RS232 mode
Robust Ethernet FMC
- 4 x 10/100/1000Mbps Ethernet Ports
- LPC FMC: Pin compatible with FMC carriers
- 125MHz Oscillator for the MAC
- Weight 450 grams
SMT-FMC510L
FMC510LFMC510L bottomSMT-FMC501L smallSMT-FMC510L Bottom small The SMT-FMC510L is an FMC module with a low pin count connector (LPC). It is primarily designed to attach to the EMC2-DP FMC PCIe104 carrier board and provide analogue video and serial interfaces. Connectivity is via BNC connectors on the main FMC PCB, BNC connectors on an adaptor PCB, and...
TEF0007-02A
The Trenz Electronic TEF0007 is a DisplayPort 1.2 compatible FMC card with data rates up to 5.4 Gbps and sink and source DP connector. SN65DP159 is used as DP Retimer and SN75DP130 as DP Redriver to connect sink and source to on board Kintex-7 FPGA. Image stream over FMC can be realized over 4 MGTs...
TEF0008-02
The Trenz Electronic TEF0008 is a FPGA to Mezzanine Card (FMC) based on VITA 57.1 FMC HPC Standard, with four SFP+ 10 GBit ports for fiber optical SFP modules. It is inteded for use on a FMC HPC carrier and can not be used stand-alone.