The Sundance SMT835 is a PCI express ZynqRF system comprised of the TEB0805 carrier board and the TE0835-02-MXE21-A RFSoC module.
TEB0805
The TEB0835 is a carrier for Trenz Electronic’s TE0835 module which is based on Xilinx UltraScale+ RFSoC. It is equipped with a microSD card reader, microUSB2.0, 21x UMCC connectors and six SMD connectors for clocks and ADC/DAC inputs/outputs, six green user LEDs, reset push button, DIP switch for mode, battery holder, FT2232H FTDI, programmable clock generators and a temperature sensor IC. The carrier provides PCIe connector as well.
RAM/Storage
- 4 Kb EEPROM
On Board
- Programmable clock generator
- I2C switch IC
- 6 x user green LEDs
- 16 x RF transformation
- Reset push button
- Temperature sensor
- FT2232H FTDI
- SDIO port expander
- 2 x DIP switch
- Pin headers
- PCIe 6 connector
Power
- 12V input supply voltage
Interface
- 21 x UMCC connectors
- 6 x SMA connectors
- 2 x Micro USB2.0
- RJ45 LAN socket
- Micro SD card socket
- 2 x UEC5 connectors
- 2 x UCC8 connectors
- PCIe x8 card
- 2 x Samtec Razor Beam SS5 (2 x 80 pol) Board to Board connectors
Dimension
- 10.66 x 16.76 cm
TE0835-ZU25DR-1
The Trenz Electronic TE0835-ZU25DR-1 is an extended-grade module based on Xilinx Zynq UltraScale+ RFSoC. The module is equipped with 4 x 1 GByte DDR4 SDRAM memory, 2 x 64 MByte SPI Flash memory, USB2.0, Ethernet transceiver and 2 x Samtec Razor Beam Board to Board (B2B) connectors. The system controller CPLD is provided by Lattice MachXO2.
The Zynq UltraScale+ RFSoC family integrates key subsystems for multiband, multi-mode cellular radios and cable infrastructure (DOCSIS) into an SoC platform that contains a feature-rich 64-bitquad-core Arm Cortex-A53 and dual-core Arm Cortex-R5 based processing system.
All parts are at least extended temperature range of 0°C to +85°C. The module operating temperature range depends on customer design and cooling solution. Please contact us for options.
Key Features
- Xilinx Zynq UltraScale+ XCZU25DR-1FFVE1156E
- FPGA Package: E1156 (35 x 35 mm)
- Available devices
- ZU25, ZU27, ZU28 (Gen1)
- ZU42, ZU43, ZU47, ZU48 (GEN3)
- Speed grade: -1 (slowest)
- Engine: Quad-core Arm Cortex-A53 MPCore up to 1.3GHz
- 8 RFADCs 12-bit with 4.096 GSPS
- 8 RFDACs 14-bit with 6.554 GSPS
- 1 x PCIe Gen3 x 16
- RAM/Storage: 4 x 1 GByte (8 Gbit) DDR4 SDRAM
- 2 x 64 MByte (512 Mbit) SPI Flash
- 2k I2C MAC EEPROM
- Total I/O: 40 IOs, 20 LVDS, 32 MIO
- On Board: Lattice MachXO2 CPLD
- Programmable ultra-high-performance DSPLL
- USB2.0 OTG transceiver
- Gigabit Ethernet transceiver
- 8 x GTY
- 4 x GTR
- 3 x oscillators
- 4 x user LEDs
- Interface: 2 x Samtec Razor Beam ST5 (2 x 80 pol) Board to Board connectors
- Power: 5 V +/- 10 % Input Supply Voltage
- Dimension: 65 x 90 mm
SMT835 Block Diagram