EMC2-SoM3-300

PC/104 OneBank Board w. PolarFire MPF300 FPGA

The EMC²-SoM3-300 is a PCIe/104 OneBank™ SBC with a PolarFire FPGA and a VITA57.1 FMC™ LPC I/O board and the Sundance SEIC expansion connector.

The PCIe/104 OneBank™ design enables the EMC²-SoM3-300 to be added to robust and rugged installations for various commercial, medical, industrial and military uses and to enable more versatility the EMC²-SoM3-300 also incorporates a VITA57.1 FMC™ LPC connector opening up an range of extra possibilities and expansion options.

  • PCIe/104 OneBank I/O board, via a Sundance 40mm x 50 mm SoM3
  • PolarFire FPGA for I/O Interface and processing
  • Integrated 1Gb Ethernet and optional SATA-2 IP-Core for storage.
  • PCI Express Gen 2 compatible and integrate PCI Express switch
  • Infinite number of EMC² can be stacked for large I/O solutions
  • Expandable with any VITA57.1 FMC I/O Module for more flexibility
  • 96mm x 90 mm PC/104 Form-Factor with Cable-less Break-Out PCB Connector

EMC²-SoM3-300 Features:

  • PolarFire FPGA MPFT300-1FCVG484E
    • Enhanced Operation Temperature: 0°C ~ 100°C (TJ)
      • Optional: -40°C ~ 100°C (TJ)
    • 300K Logic Elements
    • 484 Pin Packages, with up to 284 I/O pins
    • Four high-speed serial I/O (XCVR @ 12.7GBPS)
  • Rugged for shock and high vibration
  • Plug-on module with 2 x 100-pin and 1 x 60-pin high-speed hermaphroditic strips
  • 4 GBytes DDR4 SDRAM, Two 1024Mx16 devices to give 32-bit width-bus.
  • 256Mb SPI boot Flash
  • Programmable Clock PLL clock generator (SI5338A)
  • Gigabit Ethernet transceiver PHY (KSZ9031RNXIC)
  • 3.3VDC compatible I/O, 5VDC supply only
  • All DC/DC power supplies on board.
  • Evenly spread supply pins for good signal integrity.

40 mm x 50 mm standard SoM form factor for upgrades