The oi011 is a combination of a low-noise clock generation and distribution module (FMC406) and the EMC²-DP.

As such this system gives you 7 output clocks with a frequency between 34.375 MHz and 250MHZ and 7 output triggers  on a one bank PC104 FPGA carrier card.

Key points of the I/O module:

  • External clock input and onboard VCO
  • External reference input and on board reference (30.72MHz)
  • External 1PPS, Sync and Trigger inputs
  • Eight synchronized clock outputs (34.375MHz-250MHz)
  • Eight synchronized trigger or 1PPS outputs
  • Onboard GPS receiver for accurate data time stamping
  • Fully controllable from FMC connector
  • VITA 57.1-2010 compliant
  • LPC (Low-Pin Count) 160-Pin Connector
  • Mil-I-46058c Conformal Coating Compliant – Optional
  • A breakout cable on the front panel makes all clock and trigger signals available on individual SMA sockets.

Key points of the carrier:

  • PCIe/104 OneBank Carrier for Trenz SoC Modules
  • PCI Express Gen 2 compatible and integrate PCI Express switch
  • Infinite number of EMC²-DP can be stacked for large I/O solutions
  • Expandable with any VITA57.1 FMC I/O Module for more flexibility
  • 96mm x 90 mm PC/104 Form-Factor with Cable-less Break-Out PCB Connector

The oi011 needs to be coupled with the FPGA module of your choice.  Depending on the application you are designing for, we have a range of FPGAs to suit.

They are all based on the Trenz 5×4 System on Module standard, including Artix, Zync, Kintex and Kintex UltraScale FPGAs

For more information on these modules, please see out SoM Systems please see our range here: SoM Range.

 

OI011