oi911 – 2Ch. 14bit ADC and 2Ch. 16bit DAC

The oi911 is a combination of a quad channel DAQ module (FMC150) and the EMC²-DP.

As such this system gives you 2 fourteen bit 250 MSPS ADC channels and 2 16 bit 800 MSPS DAC channels on a one bank PC104 FPGA carrier card.

Key points of the I/O module:

  • Quad Channel Operation
    • 2-channels 14-bit A/D up to 250 Msps
    • 2-channels 16-bit D/A up to 800 Msps
  • VITA 57.1-2010 compliant
  • Conduction Cooled – Standard Option
  • Single ended AC-coupled analog signals.
  • 6 MMCX/SSMC connectors available from the front panel
  • Clock Source, Sampling Frequency, and Calibration through a SPI communication busses
  • Flexible clock tree enables:
    • internal clock source (see ordering information for available frequencies)
    • external reference clock
    • external sampling clock
  • Power-down modes to switch off unused functions for system power savings
  • Mil-I-46058c Conformal Coating Compliant (optional)
  • LPC – Low Pin Count Connector
  • LVDS IO signaling

Key points of the carrier:

  • PCIe/104 OneBank Carrier for Trenz SoC Modules
  • PCI Express Gen 2 compatible and integrate PCI Express switch
  • Infitive number of EMC²-DP can be stacked for large I/O solutions
  • Expandable with any VITA57.1 FMC I/O Module for more flexibility
  • 96mm x 90 mm PC/104 Form-Factor with Cable-less Break-Out PCB Connector

The oi911 needs to be coupled with the FPGA module of your choice.  Depending on the application you are designing for, we have a range of FPGAs to suit.

They are all based on the Trenz 5×4 System on Module standard, including Artix, Zync, Kintex and Kintex UltraScale FPGAs

For more information on these modules, please see out SoM Systems please see our range here: SoM Range.

OI911