The oi815 is a combination of a quad channel ADC module (FMC164) and the EMC²-DP.
As such this system gives you 4 sixteen bit ADC channels at 250 MSPS on a one bank PC104 FPGA carrier card.
Key points of the I/O module:
- Four-channel 16-bit 250MSPS A/D conversion
- Available as air cooled and conduction cooled
- VITA 57.1-2010 compliant
- Based on TI ADS42LB69
- Coaxial front panel inputs on SSMC connectors
- Single ended AC- or DC-coupled analog input
- Differential analog inputs – Optional
- Flexible clock tree enables:
- internal clock
- internal clock locked to an external reference
- external clock
- external sync / 1PPS
- LPC (Low-Pin Count) 160-Pin Connector
- Mil-I-46058c Conformal Coating Compliant – Optional
Key points of the carrier:
- PCIe/104 OneBank Carrier for Trenz SoC Modules
- PCI Express Gen 2 compatible and integrate PCI Express switch
- Infitive number of EMC²-DP can be stacked for large I/O solutions
- Expandable with any VITA57.1 FMC I/O Module for more flexibility
- 96mm x 90 mm PC/104 Form-Factor with Cable-less Break-Out PCB Connector
The oi815 needs to be coupled with the FPGA module of your choice. Depending on the application you are designing for, we have a range of FPGAs to suit.
They are all based on the Trenz 5×4 System on Module standard, including Artix, Zync, Kintex and Kintex UltraScale FPGAs
For more information on these modules, please see out SoM Systems please see our range here: SoM Range.
OI815