oi111 is a combination of a dual SDI and Analog video card (FM510) and the EMC²-DP integrated on a PC/104 form-factor.
Key points of the FMC module:
- SDI Video input & output (75 Ω)
- Composite (CVBS) Video input & output (75 Ω)
- 10 x full-duplex RS422 interfaces
- 4 x half-duplex RS485 interfaces
- 4 x half-duplex CAN interfaces
- 4 x isolated digital outputs (external 5-30V)
- 4 x isolated digital inputs (12-30V)
- 2 x stereo Audio inputs and outputs (600 Ω)
Key points of the carrier:
- PCIe/104 OneBank or Type 1 or Type 2 compatible
- PCI Express Gen 2 compatible and integrate PCI Express switch
- Infinitive number of oi111’s can be stacked for multiple camera inputs
- Expandable with any PCIe/104 I/O Module for more flexibility
- Can be a “Single-Board-Computer” and run stand-alone or part of a system
- 96mm x 90 mm PC/104 Form-Factor with Cable-less Break-Out PCB Connector
The oi111 needs to be coupled with the FPGA module of your choice. Depending on the application you are designing for, we have a range of Xilinx Artix, Kintex and Kintex UltraScale FPGAs or Zynq SoC to suit. They are all based on the Trenz 5×4 System on Module standard for ultimate flexibility. For more information on these modules, please see our range here: SoM Range.
oi111